基本信息

姓名：周颖惠                              出生年月：1990-09

学历：博士研究生                          学位：工学博士

邮箱：zhouyh1014@163.com

教育经历

2016.3~2022.3      西北工业大学          材料加工工程          博士

2013.9~2016.1        天津大学               材料学             硕士

2009.9~2013.6     石家庄铁道大学          金属材料工程          学士

工作经历

2022.4-至今       西安工业大学           讲师（硕士研究生指导老师）

招生信息

每年招收1-2名硕士研究生

教育教学

主讲课程：本科生课程《功能材料（双语）》

研究方向

高性能轻质金属材料成形与加工过程组织控制

高效率电弧增材制造大尺寸高强铝合金的制备工艺、凝固行为、缺陷控制、力学性能研究

科研项目

1. 中国博士后科学基金第73批面上资助（2023MD734199），凝固/固态相变协同调控电弧增材-深冷成形铝合金相析出行为及强化机理，主持，在研。

2. 陕西省自然科学基础研究计划（2023-JC-QN-0551)，电弧增材制造高强Al-Cu合金等轴/柱状晶层状异构组织调控与断裂韧性研究，主持，在研。

3. 2023年大学生创新创业训练计划项目（2021030922），高强铝合金壳体电弧增材制造成形质量与变形控制研究。

发表论文

[1] Y. Zhou, Z. Wang, X. Lin, Z. Jian, Y. Liu, Y. Ren, T. Zhang, W. Shao, X. Yang. Impact toughness and fractography of diverse microstructure in Al-Cu alloy fabricated by arc-directed energy deposition [J]. Additive Manufacturing, 2023, 63: 103414.（IF:11.0）

[2] Y. Zhou, X. Lin, N. Kang, Y. Tang, W. Huang, Z. Wang. The heterogeneous band microstructure and mechanical performance in a wire + arc additively manufactured 2219 Al alloy [J]. Additive Manufacturing, 2022, 49: 102486.（IF:11.0）

[3] Y. Zhou, X. Lin, Z Jian, S. Huang, Y. Ren, Y.Wu, X. Yang, W. Shao. Fracture toughness and microstructure damage behavior of thin Al-Cu alloy fabricated by wire-arc directed energy deposition [J]. Materials Science & Engineering A, 2023, 881: 145420.（IF:6.4）

[4] Y. Zhou, X. Lin, N. Kang, W. Huang, J. Wang, Z. Wang. Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy [J]. Journal of Materials Science & Technology, 2020, 37: 143-153.（IF:10.9）

[5] Y. Zhou, Y. Liu, X. Zhou, C. Liu, J. Yu, Y. Huang, H. Li, W. Li. Precipitation and hot deformation behavior of austenitic heat-resistant steels: A review [J]. Journal of Materials Science & Technology, 2017, 33(12): 1448-1456.（IF:10.9）

[6] Y. Zhou, X. Lin, N. Kang, Z. Wang, H. Tan, W. Huang. Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy [J]. Journal of Alloys and Compounds, 2021, 865.（IF:6.2）

[7] Y. Zhou, X. Lin, N. Kang, W. Huang, Z. Wang. Mechanical properties and precipitation behavior of the heat-treated wire + arc additively manufactured 2219 aluminum alloy [J]. Materials Characterization, 2021, 171.（IF:4.7）

[8] Y. Zhou, Y. Li, Y. Liu, Q. Guo, C. Liu, L. Yu, C. Li, H. Li. Precipitation behavior of type 347H heat-resistant austenitic steel during long-term high-temperature aging [J]. Journal of Materials Research, 2015, 30(23): 3642-3652.（IF:2.7）

[9] Y. Zhou, Y. Liu, X. Zhou, C. Liu, L. Yu, C. Li, B. Ning. Processing maps and microstructural evolution of the type 347H austenitic heat-resistant stainless steel [J]. Journal of Materials Research, 2015, 30(13): 2090-2100.（IF:2.7）

[10] Y. Zhou, C.Liu, Y.Liu, Q.Guo, H.Li. Coarsening behavior of MX carbonitrides in type 347H heat-resistant austenitic steel during thermal aging [J]. International Journal of Minerals, Metallurgy, and Materials, 2016, 23(3): 283-293.（IF:4.8）